Since 2003 Qualified Guarantee
WAIBANG 995 Neutral silicone structural adhesive
Product characteristics
1. Single component, neutral room temperature curing, with good adhesion, usually without primer. After curing, it can produce good adhesion to most building materials, such as glass, aluminum, steel and other surfaces.
2. The product forms cold-resistant, heat-resistant, non-corrosive elastomer after curing, with ozone resistance, ultraviolet resistance and other super weatherability.
Main use
All kinds of doors and Windows installation caulking seal; All kinds of decoration sealing; Other general building use caulking waterproof seal.
Construction summary
Cannot be used for structural bonding assembly; Not suitable for all seeping grease, plasticizer or solvent material surface; Not suitable for use in enclosed air or on surfaces that come into direct contact with food or drinking water; The surface temperature of the substrate is lower than 4℃ or more than 40℃. Do not bond materials containing copper or copper alloys.
Safety notice
Uncured structural adhesive and structural adhesive curing process will release volatile compounds, long-term inhalation of high concentrations of volatile compounds will harm health, therefore, the workplace should pay special attention to maintain good ventilation; Before curing, avoid contact with eyes, if contact with eyes, rinse with plenty of water, and then ask a doctor to check; This product will not release harmful substances after fully curing, and will not cause damage to the skin; Before using this product, the user should first check the compatibility and bonding strength of the contact material, and confirm the qualification before construction operation.
Shelf life :12 months
Implementation standard: JC/T485-2007
Product mark: SR 1 MG AK JC/T485-2007
Before using this product, please consult the company and carry out compatibility and related tests. The Company is responsible for the products correctly stored and used within the validity period. If the products do not meet the quality requirements within this scope, the user can apply for replacement or refund.
