Since 2003 Qualified Guarantee
WAIBANG 6000 Boutique curtain wall silicone weather resistant adhesive
Product characteristics
1. Single component, neutral room temperature curing, with good adhesion, usually without primer. After curing, it can produce good adhesion to most building materials, such as glass, aluminum, steel and stone surfaces.
2. The product forms cold resistance and heat resistance after curing. Non-corrosive elastomer. It has strong weather resistance such as ozone resistance and ultraviolet resistance.
3. Good compatibility with other silicone adhesives produced by the company.
Main use
1. The roof of the sun shed is weather-resistant and sealed, and the stone joint is dry hung and sealed.
2. Aluminum veneer, aluminum-plastic board, small curtain wall caulking.
3. Caulking waterproof seal for other general building purposes.
Construction summary
Cannot be used for structural bonding assembly; Not suitable for all seeping grease, plasticizer or solvent material surface; Should not be used in closed air or in direct contact with food or drinking water surface; The surface temperature of the substrate is lower than 4℃ or more than 40℃. Do not bond materials containing copper or copper alloys.
Safety notice
Uncured structural adhesive and structural adhesive curing process will release volatile compounds, long-term inhalation of high concentrations of volatile compounds will harm health, therefore, the workplace should pay special attention to maintain good ventilation; Before curing, avoid contact with eyes, if contact with eyes, rinse with plenty of water, and then ask a doctor to check; This product will not release harmful substances after fully curing, and will not cause damage to the skin; Before using this product, the user should first check the compatibility and bonding strength of the contact material, and confirm the qualification before construction operation.
Execution standard: GB/T 14683-2017
Product label: SR GB/T14683-1-Gn-25HM
Storage period: 12 months
