Since 2003 Qualified Guarantee
JINGKANG Non-polluting adhesive sealant
Product features:
Environmental protection, strong adhesion, fast curing, single component, neutral room temperature curing, easy to use, with good extrudability and thixotropy. Excellent weather resistance, anti-aging, ozone resistance and high and low temperature resistance, is the ideal weather resistant sealing material. It has good adhesion to most building materials and can be painted on the surface.
Main uses:
Interior decoration bonding caulking seal; Copper door, wall panel bonding; Bonding of tiles and slabs.
Restrictions on use:
1. Not applicable to all surfaces that bleed grease, plasticizers or solvents.
2. It is not recommended for adhesive sealing of outdoor doors and Windows glass.
3. The surface temperature of the substrate is lower than 4°C or more than 40°C should also be constructed.
4. Do not expose the adhesive surface to sunlight.
Storage period:
The shelf life is 9 months under storage conditions below 27°C and extreme relative humidity below 50 5%. This product can be shipped as non-dangerous goods.
Safety Information:
1. Special attention should be paid to maintaining good ventilation in the workplace.
2. Avoid contact with eyes before curing, if contact with eyes, wash with plenty of water, and then ask a doctor to check.
3. This product will not release toxic substances after curing, and will not cause damage to the skin.
4. Before using this product, the user should first carry out the compatibility and adhesion test of the contact material, and confirm the qualification before construction operation.
Standard: JC/T 485-2007
Statement of Responsibility:
The company guarantees that the products produced strictly comply with the national quality standards, but based on the differences in construction conditions (including substrate, construction method, climate, etc.), pre-testing should be carried out before use and whether the applicability of the products meets the construction requirements should be independently determined. In this scope, if the product does not meet the quality requirements, the customer can replace the product, in addition, the company does not assume any other direct or indirect responsibility.
