WAIBANG 658 High grade neutral silicone weather resistant adhesive_Waibang_Products_Ningbo Between Industry Co.,Ltd.
current location:Home > Products > Waibang

WAIBANG 658 High grade neutral silicone weather resistant adhesive

Product Introduction


Since 2003                                                                          Qualified Guarantee

WAIBANG 658 High grade neutral silicone weather resistant adhesive

 

Product characteristics

1. Single component, room temperature curing, easy to use in the temperature range of 4 ~ 40℃ with good extrudability and thixotropy.

2. Strong adhesion, no corrosion, no need for primer that has good adhesion with most building materials.

3. The product forms cold-resistant, heat-resistant and non-corrosive elastomer after curing, with excellent weather resistance, anti-aging, ultraviolet resistance, ozone resistance and high and low temperature resistance.

 

Main use

All kinds of doors and Windows, plastic steel doors and Windows installation and external wall sealing; Interior decoration bonding sealing and many other industrial uses.

 

Use restriction

Can not be used as silicone structural adhesive; It should not be used on all materials that ooze grease, plasticizers or solvents, such as the surface of oiled wood; It should not be used in sealed and unventilated places; It should not be used in continuously soaked places or places that are wet all year round; When the surface temperature of the material is higher than 40℃ or lower than 4 ℃, it is not suitable for construction.

 

Safety notice

1.Sealant construction sites pay special attention to maintain a good ventilation environment.

2. If the eyes accidentally come into contact with the uncured adhesive, wash them with plenty of water and ask the doctor for help.

3. The company only guarantees whether the products meet the quality requirements. However, based on the differences in construction conditions (including substrate, construction method, climate, etc.), the company shall conduct pre-testing and independently determine the applicable products of the products before use, and shall not be responsible for any losses caused by accidents or improper use during use

 

Storage period: Keep the original sealed state, stored in a cool and dry place below 30C storage period is 9 months from the production date.

 

Implementation standard: GB/T14683-2003


label: