Since 2003 Qualified Guarantee
WAIBANG 518 Quick-drying acid glass glue
Product characteristics
1. Single component, room temperature curing, easy to use in the temperature range of 4 ~ 40°C has good extrudability and thixotropy.
2. Strong adhesion, no corrosion, no need for primer that has good adhesion with most building materials.
3. After curing, the product forms a cold-resistant, heat-resistant, non-corrosive elastomer with excellent weather resistance, anti-aging, ultraviolet resistance, ozone resistance and high and low temperature resistance.
Main uses:
Interior decoration engineering caulking seal; All kinds of doors and Windows glass installation seal; All kinds of kitchen utensils, sanitary ware installation and waterproof and mildew sealing.
Application restrictions:
Can not be used as silicone structural adhesive; It should not be used on all materials that ooze grease, plasticizers or solvents, such as the surface of oiled wood; It should not be used in sealed and unventilated places; It should not be used in continuously soaked places or places that are wet all year round; When the surface temperature of the material is higher than 40℃ or lower than 4℃, it is not suitable for construction.
Safety Information:
1.Sealant construction sites pay special attention to maintain a good ventilation environment.
2. If eyes come into contact with uncured adhesive, wash them with plenty of water and ask a doctor for help.
3. The company only guarantees whether the products meet the quality requirements, but based on the differences in construction conditions (including substrate, construction method, climate, etc.), pre-testing should be carried out before use and the applicable products of the products should be independently determined, and any losses caused by accidents or improper use during use will not be held responsible.
Storage period: keep the original sealed state, stored in a cool and dry place below 30C, storage period is 9 months from the production date
Implementation standard: GB/T18583-2008
