Since 2003 Qualified Guarantee
WAIBANG 628 Quick-drying neutral silicone adhesive for doors and Windows
Product characteristics
1. Single component, room temperature curing, easy to use in the temperature range of 4 ~ 40℃ with good extrudability and thixotropy.
2. Strong adhesion, no corrosion, no need for primer that has good adhesion with most building materials.
3. After curing, the product forms a cold-resistant, heat-resistant, non-corrosive elastomer with excellent weather resistance, anti-aging, ultraviolet resistance, ozone resistance and high and low temperature resistance.
Main use
Suitable for glass, aluminum, door and window engineering joint sealing; Indoor and outdoor decoration engineering joint sealing; Many other industrial uses.
Use restriction
Can not be used as silicone structural adhesive; It should not be used on all materials that ooze grease, plasticizers or solvents, such as the surface of oiled wood; It should not be used in sealed and unventilated places; It should not be used in continuously soaked places or places that are wet all year round; When the surface temperature of the material is higher than 40℃ or lower than 4 ℃, it is not suitable for construction.
Safety notice
1.Sealant construction sites pay special attention to maintain a good ventilation environment.
2. If the eyes accidentally come into contact with the uncured adhesive, wash them with plenty of water and ask the doctor for help.
3. The company only guarantees whether the products meet the quality requirements. However, based on the differences in construction conditions (including substrate, construction method, climate, etc.), the company shall conduct pre-testing and independently determine the applicable products of the products before use, and shall not be responsible for any losses caused by accidents or improper use during use
Storage period: Keep the original sealed state, stored in a cool and dry place below 30C storage period is 9 months from the production date.
Implementation standard: GB/T18583-2008
